操作视频

本系列的内容是参照Hyperledger Fabric 官方文档，实际学习、操作后，编写而成的。

我们最终目的是要搭建一个可以模拟真实网络环境下的分布式环境，就需要模拟独立的主机和IP。

一个较完备的分布式 HyperledgerFabirc 网络需要如下节点：

如果条件允许，可以直接用物理机来搭建。

如果仅做chaincode开发，只部署dev节点即可。根据自己的情况来选择。

文中的环境是用虚拟机以桥接的方式来模拟足够数量的linux主机，然后在此基础上部署Hyperledger Fabric。操作环境 Windows10， 此文中用到的工具是跨平台的，所以步骤基本适用于 Linux 和 Mac。

git, https://git-scm.com/一方面，可以做本地的代码管理。另一方面，windows版的git安装后提供类Linux的Bash命令行工具，如下图：

对于习惯Linux命令操作的人来说比较亲和。 也可以选择使用windows自带的 PowerShell 操作习惯接近于bash，个人喜好自由选择。

VisualStudioCode, https://code.visualstudio.com/ 用做文本和代码编辑

https://www.virtualbox.org/wiki/Downloads

需要下载 VirtualBox 安装程序和 VirtualBox Extension Pack 包。

设置虚拟机创建后的存储位置，确保磁盘空间足够大

安装扩展，第一次安装完VirtualBox后需要重启主机才能安装扩展包。

https://www.vagrantup.com/downloads.html

下载对应平台的安装程序，我们下载 Windows 64-bit 版本

安装完成后便可以在命令行中直接使用 vagrant

创建original 文件夹，用于导入官方 CentOS8

mkdir originalcd ./originalvagrant init

vagrant init 用于生成 Vagrantfile 配置文件

https://app.vagrantup.com/centos/boxes/8

参照官方文档导入 CentOS8的vagrant box，修改Vagrantfile 加入如下内容

Vagrant.configure("2") do |config|  config.vm.box = "centos/8"  config.vm.box_version = "1905.1"end

在目录下运行 vagrant up 即可启动虚拟机，

从上图中的文字信息 "Box 'centos/8' could not be found. Attempting to find and install..."可以推测出, Vagrant先从本地找box镜像，如果本地找不到则会从官方的镜像仓库中查找并下载。由于下载速度太慢，我们手动导入box。

首先 直接从 http://cloud.centos.org/centos/8/vagrant/x86_64/images/ 下载对应virtualbox的 box 镜像。

 $ vagrant box add centos/8 /d/work/virtualbox/CentOS-8-Vagrant-8.0.1905-1.x86_64.vagrant-virtualbox.box==> box: Box file was not detected as metadata. Adding it directly...==> box: Adding box 'centos/8' (v0) for provider:    box: Unpacking necessary files from: file:///D:/work/virtualbox/CentOS-8-Vagrant-8.0.1905-1.x86_64.vagrant-virtualbox.box    box:==> box: Successfully added box 'centos/8' (v0) for 'virtualbox'!

添加名为 centos/8 的box，box路径为 /d/work/virtualbox/CentOS-8-Vagrant-8.0.1905-1.x86_64.vagrant-virtualbox.box

$ vagrant box listcentos/8     (virtualbox, 0)original     (virtualbox, 0)originalPeer (virtualbox, 0)workbench    (virtualbox, 0)

名为 centos/8 已在本地添加成功

启动vagrant

$ vagrant upBringing machine 'default' up with 'virtualbox' provider...==> default: Importing base box 'centos/8'...==> default: Matching MAC address for NAT networking...==> default: Setting the name of the VM: original_default_04_23159==> default: Clearing any previously set network interfaces...==> default: Preparing network interfaces based on configuration...    default: Adapter 1: nat==> default: Forwarding ports...    default: 22 (guest) => 2222 (host) (adapter 1)==> default: Booting VM...==> default: Waiting for machine to boot. This may take a few minutes...    default: SSH address: 127.0.0.1:2222    default: SSH username: vagrant    default: SSH auth method: private key    default:    default: Vagrant insecure key detected. Vagrant will automatically replace    default: this with a newly generated keypair for better security.    default:    default: Inserting generated public key within guest...    default: Removing insecure key from the guest if it's present...    default: Key inserted! Disconnecting and reconnecting using new SSH key...==> default: Machine booted and ready![default] No Virtualbox Guest Additions installation found....Copy iso file D:\Program Files\Oracle\VirtualBox\VBoxGuestAdditions.iso into the box /tmp/VBoxGuestAdditions.isoMounting Virtualbox Guest Additions ISO to: /mntmount: /mnt: WARNING: device write-protected, mounted read-only.Installing Virtualbox Guest Additions 6.0.14 - guest version is unknownVerifying archive integrity... All good.Uncompressing VirtualBox 6.0.14 Guest Additions for Linux........VirtualBox Guest Additions installerCopying additional installer modules ...Installing additional modules ...VirtualBox Guest Additions: Starting.VirtualBox Guest Additions: Building the VirtualBox Guest Additions kernelmodules.  This may take a while.VirtualBox Guest Additions: To build modules for other installed kernels, runVirtualBox Guest Additions:   /sbin/rcvboxadd quicksetup VirtualBox Guest Additions: orVirtualBox Guest Additions:   /sbin/rcvboxadd quicksetup allVirtualBox Guest Additions: Building the modules for kernel4.18.0-80.el8.x86_64.Redirecting to /bin/systemctl start vboxadd.serviceRedirecting to /bin/systemctl start vboxadd-service.serviceUnmounting Virtualbox Guest Additions ISO from: /mntvagrant_vbguest.machine_loop_guard==> default: Checking for guest additions in VM...==> default: Rsyncing folder: /cygdrive/d/work/SetupFabricDevEnv/vagrant/original/ => /vagrant

安装vagrant-vbguest插件，自动安装 VBoxGuestAdditions.iso 实现宿主机与虚拟机文件同步

$ vagrant plugin install vagrant-vbguestInstalling the 'vagrant-vbguest' plugin. This can take a few minutes...Installed the plugin 'vagrant-vbguest (0.22.0)'!

启动虚拟机

vagrant up

vagrant 常用命令

vagrant upvagrant haltvagrant reloadvagrant suspendvagrant resumevagrant statusvagrant destroyvagrant global-statusvagrant box addvagrant box listvagrant package

后续介绍如何在虚拟环境中安装Hyperledger Fabric的运行环境